P2254 CEL Code on 2004 TL
I recently popped a P2254 code upon startup yesterday. My car has shown no signs of any apparent issues. The code reads: Negative current circuit/open Bank 2 Sensor 1.
I cleared the code and have driven about 20 miles. The code has not appeared again. I have searched, but I have not found much info on this particular code. I found a write-up on the P2251, which is the same issue only for Bank 1 Sensor 1. I am wondering if anybody knows if this typically means the o2 sensor needs replaced. If the light stays off should I still replace the sensor? The best I can tell, Bank 2 Sensor 1 is located on the exhaust manifold just behind the radiator. Is this correct? Also, is the correct part number for this sensor 36531-RDM-A01? Thanks in advance, Jason |
There are many tests that can be performed, but most need to be done with the Honda/Acura test equipment, but yes, that is the problem child and the correct sensor number. There are electrical values and continuity checks that can be made, but probably the easiest, although not the least expensive, is to just replace the sensor and give it a try.
|
Originally Posted by Turbonut
(Post 13546183)
There are many tests that can be performed, but most need to be done with the Honda/Acura test equipment, but yes, that is the problem child and the correct sensor number. There are electrical values and continuity checks that can be made, but probably the easiest, although not the least expensive, is to just replace the sensor and give it a try.
|
Just a quick update since I hate when I am searching and find good info, but people do not talk about their resolution.
Anyways, the CEL came back on after about 4 days. Went and checked the code and it was another P2254. I guess that is a good thing, huh? I ordered the proper sensor for Bank 2, Sensor 1 (Part #36531-RDM-A01) from OEMAcuaraParts.com. Should be here tomorrow. I will let you know if the CEL comes back on after the install. ***fingers crossed*** |
Did it work?
|
Yeah I hate when people post a problem but never post the conclusion.
|
Originally Posted by capper
(Post 16120676)
Yeah I hate when people post a problem but never post the conclusion.
|
If it didn't work he would have been back :tomato:
Or he's dead :rip: |
Originally Posted by thoiboi
(Post 16121378)
If it didn't work he would have been back :tomato:
Or he's dead :rip: Take care. |
All times are GMT -5. The time now is 02:22 PM. |
© 2024 MH Sub I, LLC dba Internet Brands