RDX Caliper Covers
We are selling the Acura 45218-TX4-A00 RDX Caliper covers for $11.00 ea. Freight will be $5.00 for 2 or $8.00 for 4. If you are interested, please call 1-866-228-8801, ext 217. This special is not available online, but must be placed over the phone. As you may know, these parts are on backorder with the factory. My last order (all sold) has an ETA of 8/3/2012. The sooner you order, the sooner we can commit future inventory to you. :thumbsup: Look forward to hearing from you.
|
I'm just glad these things are back, at a reasonable price with shipping.
|
Got mine delivered today from Curry Acura. $12.25 each with free shipping via FedEx ground.
|
To anyone who is wondering if this thread is allowed in this forum:
We afford a few extra privileges to our Platinum Sponsors, in appreciation for their support. This thread is allowed and all members are encouraged to support our paying vendors, which helps keep us open and running. I cleaned up the thread and would like to keep it that way. |
I placed an order for these caliper covers last Thursday (7/18). PJ was very quick to reply to all of my PM's, and we finally closed the deal via a phone call. Needless to say, I am anxiously awaiting my caliper covers. Thanks PJ!!! Great vendor!!! :thumbsup:
|
I received my set of caliper covers (4) this past Saturday. They look great, but I have yet to get them installed. I am hoping for this coming weekend. Whenever I can get to it, I'll post up some pics here.
Thanks again PJ for coming though on these. :thumbsup: |
Originally Posted by Pennstater
(Post 13956256)
I received my set of caliper covers (4) this past Saturday. They look great, but I have yet to get them installed. I am hoping for this coming weekend. Whenever I can get to it, I'll post up some pics here.
Thanks again PJ for coming though on these. :thumbsup: |
I ordered mine from PJ on July 27th. They are set for delivery today 8/6. I hope to see them when I get home! Thanks PJ! U rock!
|
1 Attachment(s)
I got mine today! Wow, they look great! Can't wait to install them! :thumbsup:
|
6 Attachment(s)
I got around to installing the covers this past Saturday. The first side took about an hour-and-a-half, but the other side took about 45 minutes. For the fronts, I had to cut the center metal mounting tab back to just behind the hole (where it bends down as it makes its way to the actual cover - used a Dremel). The side mounting tabs have to be bent out a bit as well. It just took some trial and error to see how it should mount up. I used Permatex high-temp black RTV to hold them in place. I thoroughly cleaned the calipers with brake cleaner and then rubbing alcohol. Once on, I let them set for at least an hour before even touching them. At that point, I installed my wheels, put the car back in the garage and let it sit in there all day Sunday. They really give a clean look to the whole "wheel presentation." Okay, so here they are installed...
Attachment 6584 Attachment 6585 Attachment 6586 Attachment 6587 Attachment 6588 Attachment 6589 |
^ looks great man!!
|
Hey do you have anymore?
|
^^^ x2
|
At this time, they are availabe to ship in 24-48 hrs. Call 561-265-0000 ext.217 to order.
|
Direct fit on a 2006 3G TL Auto? Or will i have to do some modding?
|
Originally Posted by Pennstater
(Post 13972583)
I got around to installing the covers this past Saturday. The first side took about an hour-and-a-half, but the other side took about 45 minutes. For the fronts, I had to cut the center metal mounting tab back to just behind the hole (where it bends down as it makes its way to the actual cover - used a Dremel). The side mounting tabs have to be bent out a bit as well. It just took some trial and error to see how it should mount up. I used Permatex high-temp black RTV to hold them in place. I thoroughly cleaned the calipers with brake cleaner and then rubbing alcohol. Once on, I let them set for at least an hour before even touching them. At that point, I installed my wheels, put the car back in the garage and let it sit in there all day Sunday. They really give a clean look to the whole "wheel presentation." Okay, so here they are installed...
Attachment 6584 Attachment 6585 Attachment 6586 Attachment 6587 Attachment 6588 Attachment 6589 Is this what I need to use? http://www.permatex.com/products/aut...sket_maker.htm Also, any bending of the cover for the rear ones. I just ordered two for my 6mt rears. |
^ Yep, that's the stuff.
I had to slightly bend the two end tabs out just a little bit (it is very easy to do with just your fingers). I did it just enough so that the cover would stay in place on its own (the tabs applied enough pressure to the caliper). Once I had the fitment, I removed the cover and applied the RTV to the appropriate locations (I approximated this by eye). I then slipped the covers on and cleaned up any excess RTV (its a bit messy, so have plenty of rags on hand). I also took the nozzle that comes with the RTV and got it into some of the places from behind the cover as best I could. Here is a link to the forum thread that I used as a guide... http://www.acura-cl.com/forums/showp...6&postcount=23 Good luck!!! :thumbsup: |
Penn, they look good. Your rotors look small with those wheels :tomato:
weird that the link shows up as acura-cl .com. I noticed earlier someone else linked a thread from the 3G TL section, and the link said TSX forum :scratch: |
Originally Posted by Pennstater
(Post 13972945)
^ Yep, that's the stuff.
I had to slightly bend the two end tabs out just a little bit (it is very easy to do with just your fingers). I did it just enough so that the cover would stay in place on its own (the tabs applied enough pressure to the caliper). Once I had the fitment, I removed the cover and applied the RTV to the appropriate locations (I approximated this by eye). I then slipped the covers on and cleaned up any excess RTV (its a bit messy, so have plenty of rags on hand). I also took the nozzle that comes with the RTV and got it into some of the places from behind the cover as best I could. Here is a link to the forum thread that I used as a guide... http://www.acura-cl.com/forums/showp...6&postcount=23 Good luck!!! :thumbsup: Thanks a lot. BTW, do you happen to think about how to take the caliper off later in case to change the pads or something with the cover on? Any ideas? |
Here is the original thread I made about these covers if anyone is interested in reading up on these. Thread is about 7 pages long now with good information.
https://acurazine.com/forums/3g-tl-photograph-gallery-96/rdx-brake-covers-installed-861739/ |
These look GREAT. Have the OEM finish to them, they'll last. I already have caliper covers otherwise I'd buy a set of these.
I know people think they won't look good because it'll seem like they're trying too hard. You just have to see them in person and you'll never go back to the naked look. |
2 Attachment(s)
Put them on today.
Used Black RTV to hold the two tabs on the caliper bracket. I am gonna wait till tomorrow to drive the car since it needs 24 hours for the RTV to completely cure. Looks great though, just one concern. How long can the RTV last for? These are some pictures |
I will be calling :thumbsup:
|
dam, I just tried calling but that is my fault...They must be closed already. (612pm) I will call again Monday if they are not open tomorrow ;)
|
Originally Posted by JayVee
(Post 14038066)
dam, I just tried calling but that is my fault...They must be closed already. (612pm) I will call again Monday if they are not open tomorrow ;)
|
Originally Posted by PJ-Delray Acura
(Post 14040077)
You can call at 561-265-0000, ext 217 Monday - Friday 9:30am - 5:30am EST. I am here on Sundays, but not by a phone. Remember, if you receive a voice mail, just leave a message, I will return the call. Look forward to hearing from you.
|
Anyone know if these bolt up to the Accords (03-07).
Just wondering since the accord and TL share the same suspension and brakes.. |
Thanks PJ! ...or PARTS Janette (spelling of name ?) Just ordered mine! All 4, front and rear. ;)
|
Originally Posted by JayVee
(Post 14060831)
Thanks PJ! ...or PARTS Janette (spelling of name ?) Just ordered mine! All 4, front and rear. ;)
|
F.Y.I. The 2013 updates are in the system.
You can now order the caliper covers online. I adjusted the pricing to $11.00, so no promo code is needed. Part # 45218-TX4-A00 |
I ordered mine a few weeks ago and got prompt shipping, had them in 2 or 3 days. I installed them 2 weeks ago and they look great. Thanks PJ...
|
Just 48hrs later...
:twiggie: Ahhhhhhhhhh Suki Suki Nah! I just recd my TRACKING# for my (4) 2013 RDX Caliper covers :boogie: |
Originally Posted by PJ-Delray Acura
(Post 14060878)
F.Y.I. The 2013 updates are in the system.
You can now order the caliper covers online. I adjusted the pricing to $11.00, so no promo code is needed. Part # 45218-TX4-A00 Hey man I gotta say I've almost always bought from you when dealing with OEM parts. But I've got one complaint... The 'total' price (or any prices for that matter) aren't shown on the actual page that you put your payment information in. Granted the end user should know what their cart total was the page before. But as far as checkouts on the web this is really bad practice. I would wonder what your bounce rate is on that page. I bet you loose a customer here or there. Just lookin' out for ya! BTW, shipping was $7 not $5. |
Originally Posted by Maharajamd
(Post 14065591)
Order placed!
Hey man I gotta say I've almost always bought from you when dealing with OEM parts. But I've got one complaint... The 'total' price (or any prices for that matter) aren't shown on the actual page that you put your payment information in. Granted the end user should know what their cart total was the page before. But as far as checkouts on the web this is really bad practice. I would wonder what your bounce rate is on that page. I bet you loose a customer here or there. Just lookin' out for ya! BTW, shipping was $7 not $5. :thumbsup:** A special for you (and everyone else following this thread), if you want the $5.00 flat fee for 2 caliper covers or the $8.00 flat rate fee for 4, just type "$5.00 (or $8 depending on the qty you buy) shipping per PJ" in the comment section. The order processing dept will adjust the freight prior to processing your credit card. BTW, not sure what you are referring to, We do show your complete total in the shopping cart before collecting any personal or payment information from you. If you are not seeing the total in the shopping cart at www.acuraoemparts.com prior to checkout, please call me at 561-265-0000. I am ext 217. Leave a msg if I do not answer. |
Do these fit all 04-08 TL?
Non brembo models also?? |
Originally Posted by packohotdogs
(Post 14066065)
Do these fit all 04-08 TL?
Non brembo models also?? check this thread out for all the details and how to: https://acurazine.com/forums/showthread.php?t=861739 FYI: The BREMBO guys are ONLY installing them in the rears since BASE model and TLS all have the same rear brakes...Just to let you know ;) |
Just recd all 4 of mine today :boogie: :excited:
|
These sure look good!
But, they go against everything I believe in as a human being! arghhhhhhhhh |
Originally Posted by pohljm
(Post 14069345)
These sure look good!
But, they go against everything I believe in as a human being! arghhhhhhhhh |
intentionally adding non functional un-sprung weight just for vanity. I cannot succumb.
|
All times are GMT -5. The time now is 12:48 AM. |
© 2024 MH Sub I, LLC dba Internet Brands