AcuraZine - Acura Enthusiast Community

AcuraZine - Acura Enthusiast Community (https://acurazine.com/forums/)
-   2G TL (1999-2003) (https://acurazine.com/forums/2g-tl-1999-2003-98/)
-   -   2002 Acura TLS Code 84-1 sensor logic failure (https://acurazine.com/forums/2g-tl-1999-2003-98/2002-acura-tls-code-84-1-sensor-logic-failure-761015/)

DimaB 01-25-2010 11:24 AM

2002 Acura TLS Code 84-1 sensor logic failure
 
Hello all,

Originally my problem started with random misfire problem which got fixed thanks to this site. Now I am getting the yellow triangle light with exclamation point and VSA light. The triangle light is on the second I start the car. The VSA comes on couple of minutes later after i hit the breaks. My friend work at a shop and has an OBDII computer. The only code that comes up is on the ABS section 84-1 sensor logic failure. I have looked everywhere to see what that code means and cant find any information. I called the dealer to see if they might be of any help, which they offered for $125 to diagnose the problem. I am hoping there might be someone here who has seen this or dealt with this and might offer some advice.

Thanks,

DimaB 01-27-2010 02:05 PM

Anyone?

bruistopher 01-27-2010 02:10 PM

what is your car doing? like what are the symptoms and maybe we can do a diagnostic based on your observations.

DimaB 01-27-2010 03:29 PM

Thats the thing, it seems to be running just fine. The only things is the lights are on and the VSA is not working.

TLer trash 01-27-2010 04:27 PM

It may need to have the steering angle sensor reset. The vsa modulator is another possibility.

01tl4tl 01-27-2010 05:19 PM

start with the obvious- the wheel speed sensors!, easily damaged during brake job if not careful, or damaged by road debris, or corrossion and wire damage

lavandelamusica 05-04-2011 09:49 AM

Hello People I am Having the same problem with my 2003 mdx can anybody help thank very much

mr tl 05-04-2011 01:11 PM

in the service manual the only code that resembles 84-1 is 84 - neutral position, under the VSA section, it says the ABS light will blink if you are getting this code. It doesnt sound like this is what you are getting.

Regardless, the first step in the procedure is attached
http://img708.imageshack.us/i/unledngm.jpg

also, there is no description 'sensor logic failure' in the entire ABS/VSC troubleshooting sections

01tl4tl 05-04-2011 05:26 PM

lav== post in the mdx section for better help,,this is gen2 TL

stop by parts store and ask for a free code reading
report any found back to the mdx gurus


All times are GMT -5. The time now is 11:24 PM.


© 2024 MH Sub I, LLC dba Internet Brands