2002 Acura TLS Code 84-1 sensor logic failure
#1
2002 Acura TLS Code 84-1 sensor logic failure
Hello all,
Originally my problem started with random misfire problem which got fixed thanks to this site. Now I am getting the yellow triangle light with exclamation point and VSA light. The triangle light is on the second I start the car. The VSA comes on couple of minutes later after i hit the breaks. My friend work at a shop and has an OBDII computer. The only code that comes up is on the ABS section 84-1 sensor logic failure. I have looked everywhere to see what that code means and cant find any information. I called the dealer to see if they might be of any help, which they offered for $125 to diagnose the problem. I am hoping there might be someone here who has seen this or dealt with this and might offer some advice.
Thanks,
Originally my problem started with random misfire problem which got fixed thanks to this site. Now I am getting the yellow triangle light with exclamation point and VSA light. The triangle light is on the second I start the car. The VSA comes on couple of minutes later after i hit the breaks. My friend work at a shop and has an OBDII computer. The only code that comes up is on the ABS section 84-1 sensor logic failure. I have looked everywhere to see what that code means and cant find any information. I called the dealer to see if they might be of any help, which they offered for $125 to diagnose the problem. I am hoping there might be someone here who has seen this or dealt with this and might offer some advice.
Thanks,
#6
start with the obvious- the wheel speed sensors!, easily damaged during brake job if not careful, or damaged by road debris, or corrossion and wire damage
Trending Topics
#8
Three Wheelin'
Join Date: Apr 2000
Location: toronto
Posts: 1,612
Likes: 0
Received 0 Likes
on
0 Posts
in the service manual the only code that resembles 84-1 is 84 - neutral position, under the VSA section, it says the ABS light will blink if you are getting this code. It doesnt sound like this is what you are getting.
Regardless, the first step in the procedure is attached
http://img708.imageshack.us/i/unledngm.jpg
also, there is no description 'sensor logic failure' in the entire ABS/VSC troubleshooting sections
Regardless, the first step in the procedure is attached
http://img708.imageshack.us/i/unledngm.jpg
also, there is no description 'sensor logic failure' in the entire ABS/VSC troubleshooting sections
Last edited by mr tl; 05-04-2011 at 01:13 PM.
#9
lav== post in the mdx section for better help,,this is gen2 TL
stop by parts store and ask for a free code reading
report any found back to the mdx gurus
stop by parts store and ask for a free code reading
report any found back to the mdx gurus
Thread
Thread Starter
Forum
Replies
Last Post
mada51589
3G TL Problems & Fixes
79
05-03-2022 08:54 PM
elietania
4G TL Problems & Fixes
1
09-05-2015 06:52 AM