Shake / Vibration when shifting from 3rd to 4th gear (Please Help)

Old 02-16-2011, 12:25 PM
  #1  
6th Gear
Thread Starter
 
dsussman's Avatar
 
Join Date: Feb 2011
Location: rochester ny
Age: 36
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Shake / Vibration when shifting from 3rd to 4th gear (Please Help)

i have a 04 acura TL automatic. 83,000 miles when i accelerate from 3rd to 4th the car shakes and vibrates for a couple of seconds till it shifts, then its fine. its the only gear it does it in. iv taken it to many differnt shops and have gotten diff ansers from each one. they have told me it could be the wheels needing to be balanced others have said it needs a whole need a whole new transmission . .Sence then i have gotten the two front wheels balanced and it still does it. does anyone know whats going on or has this happen to anyone else PLEASE HELP
Old 02-16-2011, 01:09 PM
  #2  
9th Gear
 
frase1ew's Avatar
 
Join Date: Feb 2011
Age: 36
Posts: 9
Likes: 0
Received 0 Likes on 0 Posts
You could try replacing your 3rd & 4th pressure switches and doing a 3x3 flush of the transmission fluid. There's a thread on here somewhere about the pressure switches.
Old 02-16-2011, 01:26 PM
  #3  
6th Gear
Thread Starter
 
dsussman's Avatar
 
Join Date: Feb 2011
Location: rochester ny
Age: 36
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
im just nervous if i flush the tranmission that it could possible couse me more problems. what are pressure switches and are they hard to change ?
Old 02-16-2011, 01:40 PM
  #4  
SHAWD 04TL is in
 
TRIOD3SIGNS's Avatar
 
Join Date: Nov 2008
Location: 2
Posts: 1,401
Received 29 Likes on 19 Posts
OUCH... try not to drive it! Order the 3rd & 4th & get some redline ATF ...... ASAP

You wont cause any more issues with the flush, the damage is already done. But it is IMPERATIVE that you use Redline ATF Type F. You wore down the gears so much that any ATF with friction modifiers will just cause it to keep slipping (aka stuttering)

Trust me, I come from this exact experience myself 3 painfull weeks ago.


Oh yeah & for the threads...... SEARCH : "Racing ATF" & also "An Interesting Conversation"
Old 02-16-2011, 01:46 PM
  #5  
SHAWD 04TL is in
 
TRIOD3SIGNS's Avatar
 
Join Date: Nov 2008
Location: 2
Posts: 1,401
Received 29 Likes on 19 Posts
AHA FOUND THEM... Remember... the faster you do it, the less damage to your trans. If you put it off.... get ready for a new TRANNY

INTERESTING CONVERSATION ABOUT TRANSMISSION
https://acurazine.com/forums/3g-tl-2004-2008-93/very-interesting-conversation-my-transmission-builder-tl-721508/

DIY CHANGING THIRD & FOURTH SWITCHES
https://acurazine.com/forums/3g-tl-2004-2008-93/110-diy-guide-replacing-3rd-4th-gear-pressure-switch-3g-tl-2004-2006-a-729149/

RACING ATF
https://acurazine.com/forums/3g-tl-performance-parts-modifications-112/racing-atf-764322/
Old 02-16-2011, 06:36 PM
  #6  
Three Wheelin'
 
ChucksCL-S's Avatar
 
Join Date: Nov 2001
Location: Millersville, Md.
Posts: 1,649
Received 5 Likes on 5 Posts
First, look up the '04 TSB for your car concerning the engine damper, it is located under the engine near the firewall I believe. I think there is a fix as they modified it to stop what you are feeling.
Old 02-16-2011, 07:22 PM
  #7  
Team Owner
 
I hate cars's Avatar
 
Join Date: Mar 2006
Location: Bakersfield
Posts: 20,172
Received 1,811 Likes on 1,282 Posts
It's the pressure switches and fluid. Search, this is one of the most talked about subjects on here.
Old 02-16-2011, 10:14 PM
  #8  
Intermediate
 
dssmith's Avatar
 
Join Date: Nov 2008
Posts: 27
Likes: 0
Received 1 Like on 1 Post
I had the same problem on my 08 from 2nd to 3rd at low speeds. I was about to have the transmission replaced under warranty but they flushed it instead and I haven't had any problems since. Flushing shouldn't cause any other problems if it's done correctly.
Old 02-16-2011, 10:29 PM
  #9  
Team Owner
 
I hate cars's Avatar
 
Join Date: Mar 2006
Location: Bakersfield
Posts: 20,172
Received 1,811 Likes on 1,282 Posts
Originally Posted by dssmith
I had the same problem on my 08 from 2nd to 3rd at low speeds. I was about to have the transmission replaced under warranty but they flushed it instead and I haven't had any problems since. Flushing shouldn't cause any other problems if it's done correctly.
A power flush will usually cause problems, there's not really a right and wrong way to do it. Pulling a cooler line and letting it pump out while you add more is sometimes called a flush and it won't hurt a thing.
Old 02-17-2011, 02:11 AM
  #10  
6th Gear
Thread Starter
 
dsussman's Avatar
 
Join Date: Feb 2011
Location: rochester ny
Age: 36
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Ok so tomorrow im starting w a tranny flush. if that does not work im going to change the pressure switches. Any other suggestions ? Thanks ppl
Old 02-17-2011, 03:04 AM
  #11  
6th Gear
Thread Starter
 
dsussman's Avatar
 
Join Date: Feb 2011
Location: rochester ny
Age: 36
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Also will the pressure switches and fluid change stop the "stuttering" or will it just help the transmission from going bad ?
Old 02-17-2011, 07:36 AM
  #12  
Team Owner
 
I hate cars's Avatar
 
Join Date: Mar 2006
Location: Bakersfield
Posts: 20,172
Received 1,811 Likes on 1,282 Posts
I'm guessing you did not read the links provided....
Old 02-23-2011, 01:28 AM
  #13  
6th Gear
Thread Starter
 
dsussman's Avatar
 
Join Date: Feb 2011
Location: rochester ny
Age: 36
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
Yess

thanks "i hate cars". i read the links, flushed the tranny and orderd the sensors. sence then the car does not shutter/shake anymore and i will assume it will ony get better w the new sensors. the porduct ID for the sensors i orderd are 28600-RAY-003 and 28610-RAY-003. along w that i orderd 2 gaskets (10MM). i beleave they are the right ones. thanks again you are the man, couldnt of done it w out you
Old 02-23-2011, 08:35 AM
  #14  
TL-S
iTrader: (4)
 
quanaman's Avatar
 
Join Date: Dec 2007
Location: Fairfax, Va
Posts: 2,544
Received 412 Likes on 365 Posts
Yup, those are the ones I ordered as well. I think 2610 is the 3rd and 2600 is the 4th if i remember correctly.... They are color coordinated though so just match up the gray with the gray sensor and the brown with the brown. Thats what i did, after I called Acura to get confirmation. I ordered online and they didn't specify which was which on the packaging.
Old 02-23-2011, 10:33 AM
  #15  
Skillionare
 
Acutron's Avatar
 
Join Date: Feb 2006
Location: East Side of MI
Age: 41
Posts: 366
Likes: 0
Received 4 Likes on 4 Posts
Why the hell so many failures under 100k? Are people just beating up on their cars?
Old 02-23-2011, 02:19 PM
  #16  
Team Owner
 
I hate cars's Avatar
 
Join Date: Mar 2006
Location: Bakersfield
Posts: 20,172
Received 1,811 Likes on 1,282 Posts
Originally Posted by Acutron
Why the hell so many failures under 100k? Are people just beating up on their cars?
Search. It's been explained literally hundreds of times. Well known issues.
Old 03-05-2011, 12:26 AM
  #17  
6th Gear
Thread Starter
 
dsussman's Avatar
 
Join Date: Feb 2011
Location: rochester ny
Age: 36
Posts: 6
Likes: 0
Received 0 Likes on 0 Posts
car runs better then ever, tranny feels tight and shifes stronger in lower gears since the new sensors. flush fixxed the shutter. feels solid. thanks for the help people, couldnt of done it w out you. dealership first told me i needed a whole new tranny..haa
Old 03-05-2011, 12:41 AM
  #18  
Team Owner
 
I hate cars's Avatar
 
Join Date: Mar 2006
Location: Bakersfield
Posts: 20,172
Received 1,811 Likes on 1,282 Posts
Glad it worked for you. Now if only Acura would listen...
Related Topics
Thread
Thread Starter
Forum
Replies
Last Post
NitroViper
3G TL (2004-2008)
4
03-20-2017 09:50 PM
ROSSARONIE
3G TL (2004-2008)
6
09-22-2015 11:46 AM
JarrettLauderdale
2G CL Dynograph Gallery
5
09-21-2015 07:51 PM
Tsov Tom
2G CL (2001-2003)
3
09-20-2015 07:31 PM
kuzdu
5G TLX (2015-2020)
3
09-10-2015 08:42 PM


Thread Tools
Search this Thread
Quick Reply: Shake / Vibration when shifting from 3rd to 4th gear (Please Help)



All times are GMT -5. The time now is 08:21 AM.