Rubbing sound coming from wheels?
#1
Rubbing sound coming from wheels?
When I drive I hear this sound as if something is rubbing somewhere by the front wheels. It kind of sounds like my tire is rubbing against something, but I have a feeling it's not the tire. When I turn the steering wheel to the left the sound gets louder. When I turn it to the right the sound goes away. I can also lightly feel the vibration in the gas pedal while driving.
Any ideas?
TIA
Any ideas?
TIA
#2
Suzuka Master
I experience something similar. I hear a rubbing sound coming from somewhere, maybe near the front tires. But I get it when i'm driving around like 45mph and I'm lightly pressing the gas pedal keeping a constant speed, so the rpms stay low. Then i hear the sound, once in a while. And if i step on the gas or take my foot completely off, it goes away. No clue if this relates to your problem.
#3
i somewhat have the same problem i got a new tire and i think when the shop put it on they torqued it too tight and it was pushing on the caliper and when i turn in either direction it sounds like a pin is scraping the rotor and when i brake it faintly goes away then comes back again randomly. got any ideas?
#4
'12 & '13 AL West Champs!
i somewhat have the same problem i got a new tire and i think when the shop put it on they torqued it too tight and it was pushing on the caliper and when i turn in either direction it sounds like a pin is scraping the rotor and when i brake it faintly goes away then comes back again randomly. got any ideas?
#5
Senior Moderator
i somewhat have the same problem i got a new tire and i think when the shop put it on they torqued it too tight and it was pushing on the caliper and when i turn in either direction it sounds like a pin is scraping the rotor and when i brake it faintly goes away then comes back again randomly. got any ideas?
#6
Senior Moderator
TL45. Does the sound sound like a humming type sound while moving?
#7
Yes I would, but I would also describe it as some sort of rubbing since the sound goes away when moving the steering wheel to the right and the sound gets louder when turning it to the left while driving.
I've been told that it might be the breaks/rotors but they were not too sure themselves.
I've been told that it might be the breaks/rotors but they were not too sure themselves.
Trending Topics
#8
Senior Moderator
Does the sound go away when you apply the brake? The sound you describe sounds like a wheel bearing.
#9
#12
#13
Senior Moderator
Sounds like a wheel bearing.
Price depends on if you do it yourself or have a shop do it. The part is like 60 bucks.
Price depends on if you do it yourself or have a shop do it. The part is like 60 bucks.
#14
Always Working In
Thanks to all your posts guys. I've been having this problem too. That scraping sound as I'm pulling off at the light or I'm goin thru a drive thru. Only happens at lower speeds up to about 15 mph then slowly fades away. I've also looked at adjusting the parking brake as I though that might be the problem but you guys were dead on. I'm going to buy the parts and look it up in the DIY section.
#15
Hi All :
Not sure if you have this same issue, but here's what I experienced and the solution. The others who posted regarding brake squealers are probably correct. So, make sure the pads are good and that the metal squealers are not in contact with the rotors before performing the procedure below.
I have a grinding/scraping sound which I know is the rotor rubbing on the rotor backing plate. An easy way to check this is to jack up each wheel (if you're not sure which one it is) and then move the back plate around and see if the sound gets better or worse when you gently move the plate around. WARNING !! Do not apply any force that would cause this part to bend. You will end up warping the plate and you will make things much worse. Once you find out it's the plate, spin the wheel while gently moving the plate around until you find a movement that makes the noise go away. Then carefully bend the plate in the same direction a bit at a time until the noise is gone.
This may have been caused by hitting a rock or something else on the road that came in contact with the plate.
Hope this helps.
smartypants.
Not sure if you have this same issue, but here's what I experienced and the solution. The others who posted regarding brake squealers are probably correct. So, make sure the pads are good and that the metal squealers are not in contact with the rotors before performing the procedure below.
I have a grinding/scraping sound which I know is the rotor rubbing on the rotor backing plate. An easy way to check this is to jack up each wheel (if you're not sure which one it is) and then move the back plate around and see if the sound gets better or worse when you gently move the plate around. WARNING !! Do not apply any force that would cause this part to bend. You will end up warping the plate and you will make things much worse. Once you find out it's the plate, spin the wheel while gently moving the plate around until you find a movement that makes the noise go away. Then carefully bend the plate in the same direction a bit at a time until the noise is gone.
This may have been caused by hitting a rock or something else on the road that came in contact with the plate.
Hope this helps.
smartypants.
#18
Cruisin'
Join Date: Aug 2008
Location: Toronto, Canada
Age: 39
Posts: 18
Likes: 0
Received 0 Likes
on
0 Posts
Hi All :
Not sure if you have this same issue, but here's what I experienced and the solution. The others who posted regarding brake squealers are probably correct. So, make sure the pads are good and that the metal squealers are not in contact with the rotors before performing the procedure below.
I have a grinding/scraping sound which I know is the rotor rubbing on the rotor backing plate. An easy way to check this is to jack up each wheel (if you're not sure which one it is) and then move the back plate around and see if the sound gets better or worse when you gently move the plate around. WARNING !! Do not apply any force that would cause this part to bend. You will end up warping the plate and you will make things much worse. Once you find out it's the plate, spin the wheel while gently moving the plate around until you find a movement that makes the noise go away. Then carefully bend the plate in the same direction a bit at a time until the noise is gone.
This may have been caused by hitting a rock or something else on the road that came in contact with the plate.
Hope this helps.
smartypants.
Not sure if you have this same issue, but here's what I experienced and the solution. The others who posted regarding brake squealers are probably correct. So, make sure the pads are good and that the metal squealers are not in contact with the rotors before performing the procedure below.
I have a grinding/scraping sound which I know is the rotor rubbing on the rotor backing plate. An easy way to check this is to jack up each wheel (if you're not sure which one it is) and then move the back plate around and see if the sound gets better or worse when you gently move the plate around. WARNING !! Do not apply any force that would cause this part to bend. You will end up warping the plate and you will make things much worse. Once you find out it's the plate, spin the wheel while gently moving the plate around until you find a movement that makes the noise go away. Then carefully bend the plate in the same direction a bit at a time until the noise is gone.
This may have been caused by hitting a rock or something else on the road that came in contact with the plate.
Hope this helps.
smartypants.
Good idea i will check mine and will post the update
#19
Help!
I have the same problem as most of you, except opposite. Just got new tires and new Stock wheels put on front replacing temporary fix, but the same size is the original tire and wheel but now when driving it makes a rubbing type sound, like humming, but it starts after about 65 mph and up, and starts shaking a little after 70, and only when slightly turning left and even less turning right, but not straight. Any ideas?
#20
I have the same problem as most of you, except opposite. Just got new tires and new Stock wheels put on front replacing temporary fix, but the same size is the original tire and wheel but now when driving it makes a rubbing type sound, like humming, but it starts after about 65 mph and up, and starts shaking a little after 70, and only when slightly turning left and even less turning right, but not straight. Any ideas?
#22
I have the same problem as most of you, except opposite. Just got new tires and new Stock wheels put on front replacing temporary fix, but the same size is the original tire and wheel but now when driving it makes a rubbing type sound, like humming, but it starts after about 65 mph and up, and starts shaking a little after 70, and only when slightly turning left and even less turning right, but not straight. Any ideas?
#23
I had this problem too. It was my wheel bearing. Just note in my case, after getting my wheel bearings fixed by a private mechanic, he only replaced my wheel bearing but damaged my hubs in the process. I would suggest replacing your hubs also. Anyone more experienced feel free to correct me, but that has been my painful experience as the sound of the damaged hub is not easy to describe and I had replaced my rotors/pads all the way around 3 times before it was discovered to be my hubs. Even Acura recommended me to change the 1 week old rotors.
#24
This noise is driving me crazy
Thanks to all your posts guys. I've been having this problem too. That scraping sound as I'm pulling off at the light or I'm goin thru a drive thru. Only happens at lower speeds up to about 15 mph then slowly fades away. I've also looked at adjusting the parking brake as I though that might be the problem but you guys were dead on. I'm going to buy the parts and look it up in the DIY section.
Thread
Thread Starter
Forum
Replies
Last Post
nanos
Car Parts for Sale
26
11-12-2015 08:41 PM