usdmJON

Whoa did this thread really turn into an sti lip thread? hahaha

For the record you dont have to cut out the entire back end of the lip like the above white TL had done. Looks great on the TL, until like another user stated, I noticed the big gap.

1. That owner cut out half the lip
2. You only HAVE to cut the ends that stick into the wheel well
3. Give the OP his thread back
4. Make profit.

ChuckP

any pics of what you cut and the install?

1black_seven

iTrader: (2)

This is the EZ lip installed.

usdmJON

Yeeeeah I dont think he was talking about the ez lip.

Not my pictures but this was the thread that gave me the idea and had me realize it was very very easy to do.

Mock it up and it will probably stick out into the wheel wells.

You just bolt it straight to the underside using the screws provided or anything youd rather use.

Step back and if it looks good then take it off and cut off the ends.
If it doesnt stick out far enough reinstall it how you see fit.
Once you are ready just hack it off. Looks like this guy didnt even take the lip off to do the cut.


Link to the thread I used
http://forums.clubrsx.com/showthread.php?t=779120

And here is my final.

1black_seven

iTrader: (2)

But EZ lip is EZ!

Damin1123

Thinking about doing one of these sti lips until I get an aspec kit. Do you guys think this would look good on a base?

http://m.ebay.com/itm/281305537496

usdmJON

Not with the winglets. Find the one without the winglets in my opinion.

Chances are you car will be just too wide and the winglets will be touching the body and probably being pushed out because of it. Thats what I see from the civic guys rocking that lip.

Damin1123

That's kind of what I was thinking. I'll probably go with the one without winglets and see how it looks on the car

jkopuffs

so does the 04-05 lip directly bolt onto base bumper with no aspec??? another thread said needs small mod to have it fit.

6spdtl04am

I would also like to know if this lip fits base bumper without aspec lip.

ChuckP

and i am wondering the same thing. I looked at the bottom of my 05 base bumper and it doesnt appear it will bolt right up based on the ebay pics. But it wouldnt be too hard to drill a few holes on the lip where the stock bumper already has them.

Damin1123

That's what I figured Id do. it's not like anyone's going to see the bottom of the bumper and the sti lip being so light since it's made of polyurethane I doubt you would need any other support beside the screws that come with it. I'm still doing a little research on a couple of them and am actually waiting on a few emails with size specs to see what would be a good fit.

mig0s

anyone can firm that it fits?

jayfox993

Just bought the EZ lip for mine. Got the stock bumper, no lip. I'll post pictures when I receive it next week, on an 03 stock bumper.

tsx_boy

I have a question I have a TSX 04 with j spec front lip if I wanted a under lip like in the picture the lip from the subaru can fit it directly bolt on?

CrunchyDaddy

No STI lip will be bolt on with any of our cars. You would have to drill some holes to line them up. Some holes might line up but others won't. This is an easy DYI project though, so don't be scared to drill new holes.

cu2wagon

Ummm... You might actually pop over to here to get a bit better infos.

Sterling

Is there any Wrx Sti lips that will fit a 2002 type S.

Thanks,

Sterling

SVTruong

I love the look on mine. Except for it's been less than 3 weeks of it on and it's starting to already come off.



This is the message I got after telling them

usdmJON

Half a year vaca son!

EvilJoker

I'm ordering one of the STI ones for my '06 base model... will post pics after install

TakaraJ32A

I'd love to see this on a base bumper, it has me extremely curious! i have been looking for an alternate look outside of the A-spec lip kit and so forth. i have a lot more to go before it would look actually proper on TK (yes I've named her Takara which means treasure, dont judge haha).

SocomM4

iTrader: (2)

Update for base ?

NJALLDAY57

iTrader: (1)

In for pics on the base