intel_908

FYI***

http://www.vled.com
Getting my v3 triton!

Nick216

http://www.vleds.com/

nate_0022

iTrader: (2)

What exactly is needed when ordering the V3 front turn signal system? It asks for three different options

Add Bulb Base Adapter*
Add Hardwire Adapter for custom installations

Add Parking Light Adapter for Single Filament Applications. 3156 7440use 3 Pin Adapter connect RED wire to parking circuit, and1156 7507use 2 Pin - 3 Pin Adapter and connect YELLOW wire to parking circuit.

vietxquangstah

iTrader: (7)

you only need the 7440/7443 base bulb adapter. The turn signals on our TL are dual filament not single so you can ignore the single filament option.

you don't need a hard wire adapter

Elegant TYPE S

iTrader: (2)

Jeez man... $150 for a pair of LED bulbs..... I can't get myself to do it yet even with 20%.

nate_0022

iTrader: (2)

Can you get me some

Vlad_Type_S

iTrader: (3)

Thanks OP! Just ordered V3 Triton Switchbacks for the front and V3 Triton reds for the rear, and the DRL LED conversion kit. And some other random bulbs.

I was waiting for their next sale to do this hehehe. Sometimes they even go up to 35% off, but I don't know when and I didn't want to wait anymore.

nate_0022

iTrader: (2)

Just recieved my 5k V3 triton switchbacks today. I was just wondering if anyone has ran the dim wire, is it necessary at night, I don't know persoanlly how bright these are going to be.

vietxquangstah

iTrader: (7)

I ran the dim wire. the way I look at it is it will prolong the life of the led since it's only running at 50% power.

there's no need for it to be running at 100% brightness when your headlights are on because your headlights are going to be the ones lighting up the road anyways.

however if you turn the light stalk to parking light mode the triton led will still be at 100%

I have 5k vled drls and I like to drive with the drls and parking lights on with the headlights off. one day I'll get 5k hids and wire it independently so I can turn all 3 on

nate_0022

iTrader: (2)

Did you run the dim wire to the ballasts then I'm assuming.

vietxquangstah

iTrader: (7)

sorry for the late reply but yeah I ran the dim wire to the ballast wire. I believe it's a green or white wire? I really don't remember. I just remember the wire was super small probably 18awg or 20awg