Exhaust Tips, Which To Get?
#1
LiQuiDFleX81
Thread Starter
Exhaust Tips, Which To Get?
i want different exhaust tips,, and as nice as our stock round ones look,, i kinda wanna do somethin different, i know i could just get those 3A tips everyones getting but i dont like to do what everyone else does so check out these
i wanna go for some kind of rectangular chrome or polished stainless steel with a rolled edge for the finished look.
1option here
http://www.stylinconcepts.com/part.a...p;scid=affprod
2nd option
http://www.magnaflow.org/index.asp?P...OD&ProdID=3680
3rd option
http://www.magnaflow.org/index.asp?P...OD&ProdID=3688
4th option
http://www.magnaflow.org/index.asp?P...OD&ProdID=3711
5th
Vibrant Oval Single Wall Angle Cut Exhaust Tips 5.5x3
http://www.prostreetonline.com/pso/i...s/VIB-1405.jpg
that's all i'm gonna post for now i'd like to hear back from you guys on these, and suggestions on others if u know of any! thanks
i wanna go for some kind of rectangular chrome or polished stainless steel with a rolled edge for the finished look.
1option here
http://www.stylinconcepts.com/part.a...p;scid=affprod
2nd option
http://www.magnaflow.org/index.asp?P...OD&ProdID=3680
3rd option
http://www.magnaflow.org/index.asp?P...OD&ProdID=3688
4th option
http://www.magnaflow.org/index.asp?P...OD&ProdID=3711
5th
Vibrant Oval Single Wall Angle Cut Exhaust Tips 5.5x3
http://www.prostreetonline.com/pso/i...s/VIB-1405.jpg
that's all i'm gonna post for now i'd like to hear back from you guys on these, and suggestions on others if u know of any! thanks
#2
08 Civic SI
not sure how they would look. i think round ones are the only ones that flow with the tl, i had some oval ones that looked good, but i dont think square would work
#5
TLs-Я-US
Join Date: Mar 2007
Location: Bellingham, WA
Age: 46
Posts: 57
Likes: 0
Received 0 Likes
on
0 Posts
Trending Topics
#10
Ok here are my 2 cents. I don't like any of the ones that are posted. But if I had to pick one, I would say go with 4th option. Oh and others would not fit if you have any kind of lip in the back, especially WW.
#11
Thread Police Chief
Join Date: Jul 2006
Location: Nashville, TN / Huntsville, AL
Age: 38
Posts: 1,372
Likes: 0
Received 2 Likes
on
2 Posts
http://www.mufflermall.com/index.php...f0037fec622d02
You don't wanna follow the crowd but anything but a round tip looks disgusting on our cars IMO. Rectangle will look ghetto and cheap on our cars, otherwise they would have come like that. Just my
You don't wanna follow the crowd but anything but a round tip looks disgusting on our cars IMO. Rectangle will look ghetto and cheap on our cars, otherwise they would have come like that. Just my
#13
Maybe "everyone" gets the 3A's because they actually look decent and are incredibly inexpensive.
Nothing but rounded/slanted cut. Those oval ones look horrible. The only way you're going to pull off that look is if the tips fit within a notched out bumper/lip. i.e. 3rd gen TL's...
So either start cutting up your bumper or just get what everyone else is getting.
Nothing but rounded/slanted cut. Those oval ones look horrible. The only way you're going to pull off that look is if the tips fit within a notched out bumper/lip. i.e. 3rd gen TL's...
So either start cutting up your bumper or just get what everyone else is getting.
#15
LiQuiDFleX81
Thread Starter
i feel like i'm stuck with one option,, i'm not happy with that answer lol gonna keep looking for something that will fit the bumper cut out still,, their's gotta be something out their that is unique...
#16
LiQuiDFleX81
Thread Starter
just gone put this out their to see what response is
i was thinking that this is very possible,, get a WW rear valance,, mark the areas in the middle of how much space you would need to dremel out for the center mounted exhaust to fit. bring it to a paint shop,, they'll probably paint it for i don't know let's say 200 at most, then order the SLP Center Mounted Quad exhaust. It would be different, something no one would have, and your not stuck with a straight round exhaust tips like everyone else.
heres some pics for a better visual,, if u look at the camaroSS rear bumper,, it's really not that much different from ours,, i'm just talking about the lower portion, cover your hand over the rest of the car and visualize guys
i was thinking that this is very possible,, get a WW rear valance,, mark the areas in the middle of how much space you would need to dremel out for the center mounted exhaust to fit. bring it to a paint shop,, they'll probably paint it for i don't know let's say 200 at most, then order the SLP Center Mounted Quad exhaust. It would be different, something no one would have, and your not stuck with a straight round exhaust tips like everyone else.
heres some pics for a better visual,, if u look at the camaroSS rear bumper,, it's really not that much different from ours,, i'm just talking about the lower portion, cover your hand over the rest of the car and visualize guys
#22
LiQuiDFleX81
Thread Starter
Originally Posted by skem
center mount dual exhaust may look good tho
Dual Pipes instead of Quad
also it would need that underpiece that attach's to the bumper,, isee how its' different from the quad exhaust setup,, that set up has 2 pieces,, this setup has one continuous piece attached to the bumpber,, that looks very clean to me and not like some bolted or taped on GFX
by the way these pics make me miss my Z
thoughts?
#26
Thread Police Chief
Join Date: Jul 2006
Location: Nashville, TN / Huntsville, AL
Age: 38
Posts: 1,372
Likes: 0
Received 2 Likes
on
2 Posts
Just get the comptech axelbacks or some kind of Catback. You seem to be going for all looks, but there really aren't any tip designs other than Round that look good on our cars. Sorry, thats just how the styling makes it.
Thread
Thread Starter
Forum
Replies
Last Post
rp_guy
Member Cars for Sale
9
07-16-2017 07:33 AM
08_UA7_Gr33k
Member Cars for Sale
13
02-11-2016 02:17 PM
joflewbyu2
5G TLX (2015-2020)
139
10-08-2015 11:16 AM
08_UA7_Gr33k
Member Cars for Sale
1
09-27-2015 01:56 PM