OsK

iTrader: (2)

bump for more feedback

silvrbreez

Here's my current settings

Height (Ground-Fender)
FL 24-3/4" FR 24-3/4"
RL 24-3/4" RR 24-3/4"

Dampening
F 22/32
R 16/32

I was feeling a little bouncy and adjusting the firmness up front by 6 clicks really seems to have helped with that.

OsK

iTrader: (2)

How low is that typically from stock? 2 inches? You have a Type S right? I haven't measured the stock height ground to fender yet.

I'm about to get these installed. I've seen a couple of your pictures, and it seems like it's functional low, not too low, which I like (clears fender gap). Do you scrape going straight over mall speed bumps? Do you find yourself driving like a snake on roads? lol

silvrbreez

I believe it is about 2" dropped. Maybe a little less. It's very functional with my wheel/tire combo.

The only time I have any issues with scraping is when I have to turn up a steep incline at full lock. My tires rub slightly up front. Other than that, I just take my time over speed bumps (no scraping) and try to avoid the monster inclines that just about anyone with any type of drop would fall victim too.

mr_grand_prix

iTrader: (2)

Spring Rate = 12/8
Preload Setting = 178mm
Dampening Front = 16 (begin with..)
Dampening Rear = 16 (to begin with..)
Collar to Collar Distance Front = N/A"
Collar to Collar Distance Rear = N/A"
Distance Ground to Fender Achieved Front = 25"
Distance ground to Fender Achieved Rear = 25.25"

I have slight bounciness in the front so I am going to adjust to maybe about 20 and see what happens..

Keep you posted..

FamilyGuy

Spring Rate: 12/8
Preload Setting = ~173mm (went 1-2mm over the recommended setting)
Dampening Front = 21
Dampening Rear = 16
Collar to Collar Distance Front = N/A
Collar to Collar Distance Rear = N/A
Distance Ground to Fender Achieved Front = ~24.9"
Distance ground to Fender Achieved Rear = ~24.9"