My new wheels, Work Emotion CR Kai
#1
Racer
Thread Starter
My new wheels, Work Emotion CR Kai
After taking off snow tires, i ran stockies for a while. Ordered these in mid-february and they finally arrived last week.
Got them on the car and heres a few snaps. Wont have time for an actual photo session until exams are finished I am sort of flush but nowhere near hellaflush. Could be achieved but i just dont have the dedication or nerves to do so. Still have to fine tune the height. Front can go a little lower. Right rear needs to be raised a bit and need to drop left rear slightly
Got them on the car and heres a few snaps. Wont have time for an actual photo session until exams are finished I am sort of flush but nowhere near hellaflush. Could be achieved but i just dont have the dedication or nerves to do so. Still have to fine tune the height. Front can go a little lower. Right rear needs to be raised a bit and need to drop left rear slightly
#3
iWhine S/C 6MT TL
iTrader: (1)
Looks amazing man! Keep it up.
Question though, was the car painted from the drivers rear door back?
Question though, was the car painted from the drivers rear door back?
#7
Stand For Something
Looks good! I was gonna get these before I got my TEs but for some reason I just don't like the way they look with the Type-S front lip... looks really good with the base lip tho.
Wheel/Tire Specs?
Wheel/Tire Specs?
Trending Topics
#8
Moderator
iTrader: (3)
Damn those are hawt
Not sure what I think about the blue lugs though. They are cool but they don't really flow with the rest of the car. Unless that was the point of them
Not sure what I think about the blue lugs though. They are cool but they don't really flow with the rest of the car. Unless that was the point of them
#14
Racer
Thread Starter
Thank you for all the kind words folks. And i appreciate the honesty myron. They are actually relative cheap (compared to all the ballin' setups here on AZ).
Specs are 18x9.5 +38 (weak). I initially had 245/40/18 all around but the front was rubbing the part where the fender meets the bumper. I was scared of popping the fender if my wheels are turned and i hit a bump. The roads around here arnt that great. So i swapped the fronts to 225/40/18.
Maybe its the angle of the pics but there really isnt much gap. Tires are tucking front and back. Im able to put my palm between the front tires and fenders. In the rear, i have trouble running my finger between the tires/fenders.
I must say... i dont know. No colour problems when looking at it in person but it shows up in so many pictures, it makes me have second doubts
Specs are 18x9.5 +38 (weak). I initially had 245/40/18 all around but the front was rubbing the part where the fender meets the bumper. I was scared of popping the fender if my wheels are turned and i hit a bump. The roads around here arnt that great. So i swapped the fronts to 225/40/18.
Maybe its the angle of the pics but there really isnt much gap. Tires are tucking front and back. Im able to put my palm between the front tires and fenders. In the rear, i have trouble running my finger between the tires/fenders.
I must say... i dont know. No colour problems when looking at it in person but it shows up in so many pictures, it makes me have second doubts
#22
Are those cooper zeon 2xs tires?? How do you like them?? I have a set on my ronjons and I am having problems with them vibrating when cold from flat spotting?? Are you having this problem as well??
#23
Team Owner
iTrader: (2)
Join Date: Jan 2008
Location: Kansas City, MO (Overland Park, KS)
Posts: 36,545
Received 6,470 Likes
on
5,162 Posts
Good lookin' wheels-the blue lugs really set them off!
National Acura Meet-June 6th/Kansas City. Click here for details and to sign up!
.
National Acura Meet-June 6th/Kansas City. Click here for details and to sign up!
.
#26
Looks f'ing sick, dude.
#35
Racer
Thread Starter
Once again, thanks for all the kind words. But i guess the general consensus is that i need new nuts, but i like the blue
Yes, its starting to rust
Yup. No problems whatsoever and I've been running them for 2 yrs now. Great budget high performance tires.
Ordered from japan through speedstar
Tein SS
Nah, if anything, i'll do the lights like jptl04 mentioned. No money for TL-S tails nor do i want to be ricy and put a tint film on it. Also havnt gathered up the bravery to open up my headlights as I've seen first hand what a non-properly sealed light looks like.
Magnaflow high flow cat, resonator, mufflers and tips with 2.5" pipes
Yes, its starting to rust
Tein SS
Magnaflow high flow cat, resonator, mufflers and tips with 2.5" pipes
#37
Thanks for the info!! I have had many people say they love them but I have had nothing but issues!! I am having them warrantied next wek and we will see if that fixes the problem!!